Your CSR just quoted $89 to come out and look at a furnace. The caller said the other company down the road charges $59, and hung up. Meanwhile your diesel card statement came in at a number you didn't budget for, and you're wondering whether the fee needs to go up for January or whether it's already too high.
How much to charge for a service call isn't a number you should borrow from a competitor's website or a forum thread. It's a number you can build from four costs you already pay. This post walks through that math with real 2026 inputs, shows how much of the increase is actually fuel (less than you'd think), and lays out the honest trade-offs of waiving the fee when the customer approves the repair.
What a service call fee actually pays for
Call it a service call fee, a trip charge or a dispatch fee. Whatever the name, the money covers the cost of showing up before any repair is sold:
- The drive. Your tech's paid time behind the wheel, plus what the truck costs per mile.
- The diagnosis. The first stretch of time on site, figuring out what's wrong.
- Overhead. The office, the phones, insurance, the dispatcher's time, software. Every call carries a share whether it turns into a repair or not.
- Margin. A call that only covers its costs leaves nothing for the slow weeks.
Billing the drive itself by the hour or by distance zones is a different pricing choice. We cover that in how to charge for travel time. This post is about the flat fee most residential HVAC and plumbing shops quote on the phone.
Build your service call fee from your own costs
Here's a worked example for an HVAC shop. Every input is either a public figure or a number you'd replace with your own. Swap in yours and the method still holds.
1. The drive
Use a typical drive into a residential call: 35 minutes and 15 miles, common in suburban service areas.
- Tech pay for the drive. The BLS median wage for HVAC mechanics and installers is $29.33 an hour (May 2025). Wages aren't the whole cost; payroll taxes, workers' comp and benefits sit on top. For this example we'll multiply by 1.3. Use your own burden figure if you know it. 35 minutes at $29.33 × 1.3 comes to $22.24.
- The truck. The IRS standard mileage rate is 76 cents a mile for the second half of 2026, and it's meant to cover fuel, maintenance, insurance and depreciation together. It's a reasonable floor for a service vehicle. 15 miles × $0.76 = $11.40.
2. The diagnosis
Say the first 30 minutes on site are included in the fee. At the same burdened rate, that's $19.06.
3. Overhead
Take your yearly overhead that isn't tied to a specific job (office wages, rent, insurance, phones, software, marketing) and divide it by the number of service calls you run in a year. Illustrative example: $180,000 of overhead across 3,000 calls is $60 per call. This is usually the biggest line, and the one most owners leave out.
4. Add it up, then add margin
| Cost | Per call |
|---|---|
| Drive: tech time | $22.24 |
| Drive: truck | $11.40 |
| Diagnosis, first 30 minutes | $19.06 |
| Overhead share | $60.00 |
| Cost to show up | $112.70 |
Price that for a 20% margin and you get about $141. For 25%, about $150. So in this example a fee somewhere around $139 to $149 covers the visit with something left over. A $59 fee covers about half the cost of the truck pulling into the driveway.
Your numbers will differ. A shop with a lean office and tight service area might land near $100. A shop in a high-cost metro with long drives might need $175. The point is that the number comes from your books.
How much does diesel over $6 change it?
Less than it feels like at the pump.
The EIA's weekly retail price survey put U.S. on-highway diesel at $6.292 a gallon for the week of November 2, 2026. That's $2.539 more than a year earlier, when it was about $3.75.
On our 15-mile drive in a truck getting 15 mpg, fuel is one gallon:
- A year ago: about $3.75
- Now: about $6.29
- Difference: about $2.54 per call
That's real money across 3,000 calls (about $7,600 a year in this example), and it's why the truck line above uses the full IRS rate rather than fuel alone. But it's around 2% of a $140 fee. Drive time and overhead move your service call fee far more than fuel does. If you're raising the fee for January, look at your wage increases and overhead first, then fuel.
If you'd rather pass fuel through on its own while prices stay high, a separate fuel surcharge is an option. We lay out the formula and the invoice wording in what a service van mile really costs.
Charge it, waive it, or credit it? The trade-offs
There are three common ways to run the fee. None is wrong. Pick based on how your phones and your techs actually work.
Charge it every time
The customer pays the fee whether or not they approve a repair.
- Easier: clean books. Every call covers its own cost.
- Harder: it's the number price shoppers compare on the phone. Some will hang up.
Waive it if they approve the repair today
The fee only sticks when the customer says no.
- Easier: strong close on the phone ("it's $149 to come out, and that's waived if you go ahead with the repair today").
- Harder: the cost of the visit doesn't disappear. It has to live inside your repair prices.
Here's what that means in numbers. Run 100 calls in our example, at a cost of $112.70 each: $11,270. If 60 customers approve the repair and the fee is waived for them, only 40 pay the $149 fee: $5,960. The other $5,310 has to come from the 60 repairs. That's about $88 built into every repair price. If your flat-rate repair prices were set without that in mind, waiving the fee is quietly costing you.
Credit part of it
A middle path: the fee is charged, and part of it is credited toward an approved repair. It's a softer close than a full waiver, and easier to keep honest in the pricebook. The same math applies to the part you credit.
What to call it
Trade press has argued about the name for years. A long-running piece in Contracting Business on trip charges warns that "diagnostic fee" invites arguments and treats the fee as a regulator: raise it when the board is full, lower it when you need calls. Whatever you call it, say the same thing on the phone, on your website and on the invoice.
Show it where customers decide
The fee causes the most friction when it surprises someone. Say it before the truck rolls:
- On the phone. One script, every CSR, every call.
- Online. If you list services on a booking page or website, show the fee or a "from" price. We weigh the pros and cons in should you show prices online?
- On the invoice. One line, same name as on the phone.
Where FSM Navigator fits
A fee only works if it's the same number everywhere and you can see whether it's paying for itself. That's the part software can hold for you.
On Pro, your pricebook holds your services, labor and materials, so the service call goes on every quote and invoice at the price you set, not whatever the tech remembers. Your online booking page draws on the same list, and for each service you choose whether it shows "from" a price, "free estimate" or "quoted on site", so the customer sees your fee or your policy before they request a visit. You approve each request before it goes on the schedule.
When the diagnosis turns into a repair, the tech's quote can carry good, better and best options. The customer signs it from their phone, can pay a deposit online, and the signed quote turns into the job at the agreed price.
Then check the math. The business sets its fuel cost per mile once, and new jobs and estimates use it. On Pro, every drive to a job is logged automatically, and job profitability shows the margin on every completed job: revenue against technician labor, parts and mileage cost, with any missing cost shown as Unknown instead of guessed. Look at the calls that only collected the fee and you'll see quickly whether your number covers the drive.
FAQ
How much should I charge for a service call?
Build it from your own costs: the tech's paid drive time, the vehicle's cost per mile, the first block of diagnosis time, and a share of overhead per call, then add margin. In our HVAC example those costs come to about $113 per call, which points to a fee around $139 to $149.
What's the difference between a trip charge and a service call fee?
Shops use the terms interchangeably. Some use "trip charge" for the drive alone and "service call fee" for the drive plus the first stretch of diagnosis. Pick one name and use it on the phone, online and on the invoice.
How much does high diesel add to a service call?
Less than most owners expect. At $6.292 a gallon (EIA, week of November 2, 2026), a 15-mile drive in a 15-mpg truck uses about $6.29 of fuel, about $2.54 more than a year earlier. Drive time and overhead have a bigger effect on the fee.
Should I waive the service call fee if the customer approves the repair?
It helps the close, but the visit still costs money, so that cost has to be built into your repair prices. In our example, waiving the fee for the 60% of customers who approve adds about $88 to every repair.
Should I charge more for after-hours calls?
Most shops do, because overtime pay raises the drive and diagnosis lines. Run the same math with your after-hours wage rate.
Put your service call fee in one price list that every quote and booking request uses. Try Pro free for 14 days.